TNPSC Assistant Training Officer Syllabus 2023 PDF: The Tamil Nadu Public Service Commission is going to conduct the Examination for the post of Assistant Training Officer (Stenography-English) and Junior Technical Assistant. Candidates who are going to appear for the examination can check the Exam Pattern given below.
TNPSC JTA Syllabus 2023 Download:
Name of the Board | Tamil Nadu Public Service Commission |
Title of the Post | Assistant Training Officer (Stenography-English) and Junior Technical Assistant |
Vacancy | 07 |
Last Date to Apply | 23.08.2023. |
CBT Test Date | 05.10.2023 & 06.10.2023 |
TNPSC New Notification 2023 Out
TNPSC ATO Exam Pattern 2023:
Post Name | Paper | Subject | Duration | Total Marks |
Assistant Training Officer | Paper 1
|
Stenography in English
(Code No.378) Diploma Standard |
1½ Hours | 300 |
Paper 2 |
|
3 Hours | ||
Junior Technical Assistant | Paper 1
|
Handloom Technology / Textile Technology / Textile Manufacture (Code No.339)
(Diploma Standard) |
3 Hours | 450 |
Paper 2 |
|
3 Hours |
TNPSC Assistant Training Officer Syllabus 2023:
Paper 1 Stenography (Diploma Standard) Code No.378
UNIT I
- Importance of Stenography
- Consonants
- Grammalogues
- Phraseography
- Circles and Loops
- Initial and Final Hooks
UNIT II
- Compound Consonants
- The Halving Principle
- The Doubling Principle
- Medial Semicircle
UNIT III
- Prefixes and Negative words
- Suffixes and Terminations
- Contractions
- Special Contractions
UNIT IV
- Advanced Phraseography
- Intersections
- Usage of Political Phrases
- Usage of Legal Phrases
UNIT V
- Note-taking and Transcription
- Legislature Reporting
- Techniques for improving Speed
Paper-I Handloom Technology / Textile Technology/ Textile Manufacture (Diploma Standard) Subject Code: 339
UNIT- I: Fibre Properties And Man-Made Fibre Spinning
- Properties of textile fibres
- Classification of Textile fibres – vegetable, animal, mineral, regenerated, synthetic
- Microscopic, physical and chemical test methods for fibre identification
- Physical & Chemical properties of Vegetable fibres – Cotton, Jute, linen
- Physical & Chemical properties of Animal fibres – Wool, Silk
- Physical & Chemical properties of Regenerated Cellulosic fibres – Viscose and Acetate Rayon, Cuprammonium Rayon
- Physical & Chemical properties of Synthetic fibres – Polyester, Nylon
- Requirements of fibre forming polymers
- Spinning of Polymers – Melt Spinning, Wet spinning, Dryspinning
- Post Spinning Operations – Drawing, Crimping, Heat setting, Texturisation and spin finish application
UNIT- II: Spun Yarn Formation
- Ginning – Principle, machines and gin out-turn.
- Objectives / Principles of opening, cleaning and mixing/blending machines
- Working mechanisms of blowroom, card, drawframe, comber, comber preparatory, speedframe, ringframe, doubling machinery.
- Salient features of blowroom, card, drawframe, comber, comber preparatory, speedframe, ringframe, doubling machinery.
- Working principles and features of open end spinning machines – rotor, air jet and air vortex
- Norms and Critical settings related to quality / production in spinning machinery.
- Yarn conditioning, reeling, bundling and baling
- Maintenance of spinning machines
UNIT- III: Textile Calculations
- Calculations of speed, draft, hank, production and efficiency in spinning machines.
- Production and efficiency calculations in Winding, Warping, Sizing and Weaving
- Indirect count systems –English, French, Worsted, linen and metric
- Direct count systems – Tex and Denier.
- Conversion of yarn count from one system to other -Within Indirect, within Direct systems
- Conversion of yarn count from indirect to direct systems and vice versa
- Resultant count of folded yarn, Average count, Yarn Costing
- Reed and heald calculations; Fabric cover, Fabric Costing.
UNIT- IV: Fabric Formation
- Objectives of preparatory processes
- Preparatory processes for handloom industry
- Warp winding – random and precision winding, winding drum parameters
- Stop motions, yarn clearers, tensioners and knotters/splicers
- Warping –Types of warping, Creels, Length measurement, stop motion
- Working principles of Pirn winders 29
- Sizing –Ingredients, Size recipes for cotton, silk and blends of cotton with polyester and viscose.
- Principles of Drawing-in and Denting.
- Primary, Secondary and Tertiary motions of loom, Loom timing diagram.
- Tappet, Dobby and Jacquard shedding, Handloom shedding motion, Drop Box mechanism.
- Features of Pit loom, raised pit loom, frame loom, semi-automatic loom and improved handlooms.
- Principles of Shuttleless Weft insertion systems.
- Maintenance of shuttle and shuttleless looms
- Fabric defects – causes and remedies
UNIT- V: Fabric Structure
- Elements of woven fabric design – weave, draft and peg plan
- Construction of Weaves – Plain weave and its derivatives, Regular and Modified Twills, Sateen and Satin, Crepe, Honey comb, Brighton honey comb, Mock-leno, Huck-a-back, Bedford cords, Welt, pique, backed cloth, Double Cloth, Triple Cloth, Tubular cloth, damask, tapestry, patent satin.
- Extra warp and Extra weft figuring
- Terry Pile – 3 pick, 4 pick, 5 pick and 6 pick terry weaves.
- Cut Pile – Velvets and Velveteens.
- Gauze and Leno structures
- Colour and Weave Effect
- Computer Aided Textile Designing (CATD) – Photoshop, Coreldraw, Paintshop Pro and CATD softwares
UNIT – VI: Chemical Processing
- Preparatory processes – Desizing, Scouring and Bleaching – Objectives, Machines and Methods
- Mercerisation – Objectives, Machines and Methods
- Dyeing techniques for cotton, silk and blends– Direct, Reactive, Vat, Acid, Basic and Disperse dyes.
- Batchwise and Continuous dyeing. Dyeing machines.
- Styles of printing – Direct, Resist, Discharge.
- Printing techniques – Roller, Rotary Screen, Flat bed.
- Mechanical and chemical finishing – calendaring, anti-shrink, resin finish, water repellent finish, flame retardant finish.
UNIT – VII: Knitting, Garments & Modern Developments in Handlooms
- Knitting – Yarn quality requirements, principles of weft and warp knitting
- Basic weft and warp knitted structures and its properties – plain, rib, interlock and purl.
- Garments – Pattern making, Spreading, Cutting, Sewing
- Developments in Handlooms – Solid border weaving, multiple putta weaving, pneumatic / electrical lifting devices for jacquard, electronic jacquard for handlooms.
UNIT – VIII: Testing & Quality Control
- Important terms in Textile quality control – Mean, Median, Mode, SD, SE and CV.
- Calculations related to test of significance.
- Control charts and their applications in textile quality control.
- Sampling techniques – objectives and types of sampling
- Humidity control – Standard and Testing atmosphere, Measurement of Relative Humidity.
- Measurement of fibre length, strength , fineness, maturity and trash
- Determination of yarn count, twist – Twist per unit length, twist multiplier; strength – CSP, RKM; elongation, hairiness, Evenness 31
- Determination of fabric strength, stiffness, handle, drape, thickness, GSM, crease resistance, abrasion resistance, pilling resistance, air / water permeability, dimensional stability.
- Determination of fastness to washing, rubbing, light.
- Inspection and Merchandising.
UNIT- IX: Nonwovens, Technical Textiles& Handloom Fabrics
- Classification of Nonwovens – Mechanical, Thermal and Chemical bonded fabrics
- Technical Textiles- Belts, Tyre-cords, Coated abrasives, Airbags, Flame Resistant fabrics, Ballistic protective fabrics, Geotextiles, Medical Textiles.
- Quality Particulars of handloom fabrics – Sarees, dhotis, angavastrams, bedsheets, towels, lungies, fabrics reserved for exclusive production on handlooms.
- Traditional handloom Saris – Banaras, Kanchipuram, Jamdhani, Paithani, Chanderi, Patola, Sungudi, Ikats of Andhra pradesh and Orissa.
Unit- X: Textile Mill Management
- Plant location, layout, material handling in textile mills
- Selection and balancing of preparatory machines and looms
- Costing – Elements, Balance sheet, Profit& Loss Account
- Production, Planning& Control.
- Total Quality Management, Management Information System.
- Human Resources management – Selection, recruitment, training, Industrial relations and Labour laws
- Role of BIS, AEPC, HEPC, IIHT, WSC, Textile Committee, Textile Commissioner Office.
- New Textile Policy.
- Pollution Control: Types – Air, Water, Noise; Characteristics of Effluent and Effluent treatment of Wet Processing industry
- Energy audit and conservation.
PAPER -II Syllabus For Written Examination:
Part-A கட்டாய தமிழ்மொழி தகுதித் தேர்விற்கான பாடத்திட்டம் (கொள்குறி வினாவிற்கான தலைப்புகள்) பத்தாம் வகுப்பு தரம்
- பிரித்தெழுதுதல் / சேர்த்தெழுதுதல்.
- எதிர்ச்சொல்லை எடுத்தெழுதுதல்.
- பொருந்தாச் சொல்லைக்கண்டறிதல்.
- பிழைதிருத்தம் (i) சந்திப்பிழையை நீக்குதல் (ii)மரபுப்பிழைகள், வழுவுச் சொற்களை நீக்குதல் / பிறமொழிச்சொற்களை நீக்குதல்.
- ஆங்கிலச் சொல்லுக்கு நேரான தமிழ்ச்சொல்லை அறிதல்.
- ஒலி மற்றும் பொருள் வேறுபாடறிந்து சரியான பொருளையறிதல்.
- ஒரு பொருள் தரும் பல சொற்கள்.
- வேர்ச்சொல்லைத் தேர்வு செய்தல்.
- வேர்ச்சொல்லைக் கொடுத்து / வினைமுற்று, வினையெச்சம், வினையாலணையும் பெயர், தொழிற்பெயரை / உருவாக்கல். 10. அகரவரிசைப்படி சொற்களை சீர் செய்தல்.
- சொற்களை ஒழுங்குப்படுத்தி சொற்றொடராக்குதல்.
- இருவினைகளின் பொருள் வேறுபாடு அறிதல். (எ.கா.) குவிந்து-குவித்து
- விடைக்கேற்ற வினாவைத் தேர்ந்தெடுத்தல்.
- எவ்வகை வாக்கியம் எனக் கண்டெழுதுதல் – தன்வினை, பிறவினை, செய்வினை, செயப்பாட்டு வினை வாக்கியங்களைக்கண்டெழுதுதல்.
- உவமையால் விளக்கப்பெறும் பொருத்தமான பொருளைத் தேர்ந்தெழுதுதல்
- அனுவல் சார்ந்த சொற்கள் (கலைச்சொல்)
- விடைவகைகள்.
- பிறமொழிச் சொற்களுக்கு இணையான தமிழ்ச் சொற்களைக் கண்டறிதல் (எ.கா.) கோல்டு பிஸ்கட் – தங்கக்கட்டி.
- ஊர்ப்பெயர்களின் மரூஉவை எழுதுக (எ.கா.) தஞ்சாவூர் – தஞ்சை
- நிறுத்தற்குறிகளை அறிதல்.
- பேச்சுவழக்கு, எழுத்துவழக்கு (வாரான் – வருகிறான்).
- சொற்களை இணைத்து புதிய சொல் உருவாக்கல்.
- பொருத்தமான காலம் அமைத்தல்
(இறந்தகாலம், நிகழ்காலம், எதிர்காலம்). - சரியான வினாச்சொல்லைத் தேர்ந்தெடு.
- சரியான இணைப்புச் சொல்
(எனவே, ஏனெனில், ஆகையால், அதனால், அதுபோல). - அடைப்புக்குள் உள்ள சொல்லைத் தகுந்த இடத்தில் சேர்க்க.
- இருபொருள் தருக.
- குறில் – நெடில் மாற்றம், பொருள் வேறுபாடு
- கூற்று, காரணம் – சரியா? தவறா?
- கலைச்சொற்களை அறிதல்(எ.கா. – Artificial Intelligence – செயற்கைநுண்ணறிவு, Super Computer – மீத்திறன் கணினி)
- அகரவரிசைப்படி சொற்களை சீர் செய்தல்
- பொருத்தமான பொருளைத் தெரிவு செய்தல்
- சொற்களின் கூட்டுப் பெயர்கள் (எ.கா.) புல் -புற்கள்
- சரியான தொடரைத் தேர்ந்தெடுத்தல்
- பிழைதிருத்துதல் (ஒரு-ஓர்)
- சொல் – பொருள் – பொருத்துக – கெர்
- ஒருமை பன்மையிழை
- பத்தியிலிருந்து வினாவிற்கான சரியான விடையைத் தேர்ந்தெடு.
- மேலும் விரிவான பாடத்திட்டங்களுக்கு கீழே வழங்கி உள்ள இணைய
Part-B General Studies (SSLC Standard) (Topics for Objective Type)
- General Science
- Current Events
- Geography
- History and Culture of India
- Indian Polity
- Indian Economy
- Indian National Movement
- History, Culture, Heritage And Socio-Political Movements Of Tamil Nadu
- Development Administration In Tamil Nadu
- Aptitude & Mental Ability Tests
**Whatsapp Group for Latest Job Updates **
Candidates should apply for the post before 23.08.2023.
The CBT exam is scheduled to be held on 05.10.2023 & 06.10.2023.
There are 07 vacancies available.