UPSC ESE Syllabus 2021 PDF – Download Engineering Services Exam Pattern Here!!!

0
55
UPSC ESE Syllabus 2021 PDF – Download Engineering Services Exam Pattern Here!!!
UPSC ESE Syllabus 2021 PDF – Download Engineering Services Exam Pattern Here!!!

UPSC ESE Syllabus 2021 PDF – Download Engineering Services Exam Pattern. UPSC will conduct the Engineering Services Exam (ESE) preliminary level on 18th July, 2021 for recruitment of vacancies in Civil/Mechanical/Electrical/Electronics & Telecommunication Engineering categories. Check the complete UPSC Engineering Services Syllabus and Exam Pattern details.

Here we updated the latest UPSC ESE Pattern for Civil, Mechanical, Electrical, and Electronics & Telecommunication Streams. Candidates who are searching for UPSC Engineering Services Exam Syllabus 2021 can get here the complete Syllabus PDF along with Exam Pattern. Applicants who have cleared the Preliminary examination can now appear for the UPSC ESE Mains Exam that is to be conducted on 10.10.2021.

UPSC Engineering Services 2021 Notification PDF OUT – Download ESE Exam Eligibility Details & Important Dates Here!!! 200+ Vacancies

UPSC ESE Exam Syllabus 2021

Name of the Board

Union Public Service Commission

Exam Name

Engineering Services Examination
Vacancy

215

Exam Date

18.07.2021 and 10.10.2021

Selection Process

Prelims, Mains and Interview

Status

Syllabus Available

UPSC ESE Selection Process 2021:

  • The IES/ESE is conducted in the following stages. There are three rounds of the exam. The Preliminary round, the Main round and finally, the interview round.
  • The candidates, who are declared qualified in the Preliminary round, are admitted for the 2nd round of the exam that is the Main exam.
  • The candidates, who qualify for the Main Round, are given a call for the interview.
  • Stage I: Engineering Services (Preliminary/Stage I) Examination (Objective Type Papers) for the selection of candidates for the Stage‐II: Engineering Services (Main/Stage‐II) Examination;
  • Stage II: Engineering Services (Main/Stage II) Examination (Conventional Type Papers) and
  • Stage III: Personality Test

UPSC ESE Examination Pattern 2021:

Prelims Exam Pattern for Civil/Mechanical/Electrical/Electronic Engineering

The Prelims exam will be held offline in pen and paper format containing the Multiple Choice Questions (MCQs):

Paper Subject Marks Time
Category I – Civil Engineering
Paper-I General Studies and Engineering Aptitude 200 2 Hrs
Paper-II Civil Engineering 300 3 Hrs
Category II – Mechanical Engineering 
Paper-I General Studies and Engineering Aptitude 200 2 Hrs
Paper-II Mechanical Engineering 300 3 Hrs
Category III – Electrical Engineering
Paper-I General Studies and Engineering Aptitude 200 2 Hrs
Paper-II Electrical Engineering 300 3 Hrs
Category IV – Electronics & Telecommunication Engineering
Paper-I General Studies and Engineering Aptitude 200 2 Hrs
Paper-II Electronics & Telecommunication Engineering 300 3 Hrs

 Note: There are four alternative for the answers to every question. For each question for which a wrong answer has been given by the candidate,  1/3rd of the marks assigned to that question will be deducted as penalty. 

Mains Exam Pattern for Civil/ Mechanical / Electrical/ Electronic Engineering

Paper Subject Marks Time
Category I – Civil Engineering
Paper-I Civil Engineering 300 3 Hrs
Paper-II Civil Engineering

 

300

3 Hrs
Category II – Mechanical Engineering
Paper-I Mechanical Engineering 300 3 Hrs
Paper-II Mechanical Engineering 300 3 Hrs
Category III – Electrical Engineering
Paper-I Electrical Engineering 300 3 Hrs
Paper-II Electrical Engineering 300 3 Hrs
Category IV – Electronics & Telecommunication Engineering 
Paper-I Electronics & Telecommunication Engineering 300 3 Hrs
Paper-II Electronics & Telecommunication Engineering 300 3 Hrs

Stage‐III (Personality Test) ‐ 200 Marks:

Candidates must write the papers in their own hand. In no circumstances will they be allowed the help of a scribe to write the answers for them.  The  Persons  with  Benchmark  Disabilities  in  the  categories  of  Low  Vision  will  be  provided  the facility of scribe, if desired by the person.

UPSC ESE Exam Syllabus 2021:

Prelims Syllabus:

General Studies and Engineering Aptitude

  • Current Events  of  national  & international  importance
  • Engineering Aptitude – Reasoning & Analytical ability
  • Engineering Mathematics & Numerical Analysis
  • General Principles of Design,  Drawing
  • Standards & Quality practices
  • Energy and Environment: Conservation, Environmental Pollution, Climate  Change
  • Basics of Project Management
  • Basics of Material Science and Engineering
  • Information and Communication Technologies (ICT) tools – networking, e‐ governance and education.
  • Ethics and values in Engineering
  • Knowledge of relevant topics in engineering

Mains Syllabus:

Civil Engineering

Contents for syllabi of both the Papers together for Preliminary Examination/Stage-I (objective type Paper-II) and separately for Main/Stage-II Examination (Conventional type Paper-I and Paper-II).

PAPER – I

  1. Building Materials: Stone, Lime, Glass, Plastics, Steel, FRP, Ceramics, Aluminum, Fly Ash, Basic Admixtures, Timber, Bricks and Aggregates: Classification, properties and selection criteria;

Cement: Types, Composition, Properties, Uses, Specifications and various Tests; Lime & Cement Mortars and Concrete: Properties and various Tests; Design of Concrete Mixes: Proportioning of aggregates and methods of mix design.

  1. Solid Mechanics: Elastic constants, Stress, plane stress, Strains, plane strain, Mohr’s circle of stress and strain, Elastic theories of failure, Principal Stresses, Bending, Shear and Torsion.
  2. Structural Analysis: Basics of strength of materials, Types of stresses and strains, Bending moments and shear force, concept of bending and shear stresses; Analysis of determinate and indeterminate structures; Trusses, beams, plane frames; Rolling loads, Influence Lines, Unit load method & other methods; Free and Forced vibrations of single degree and multi degree freedom system; Suspended Cables; Concepts and use of Computer Aided Design.
  3. Design of Steel Structures: Principles of Working Stress methods, Design of tension and compression members, Design of beams and beam column connections, built-up sections, Girders, Industrial roofs, Principles of Ultimate load design.
  4. Design of Concrete and Masonry structures: Limit state design for bending, shear, axial compression and combined forces; Design of beams, Slabs, Lintels, Foundations, Retaining walls, Tanks, Staircases; Principles of pre-stressed concrete design including materials and methods; Earthquake resistant design of structures; Design of Masonry Structure.
  5. Construction Practice, Planning and Management: Construction – Planning, Equipment, Site investigation and Management including Estimation with latest project management tools and network analysis for different Types of works; Analysis of Rates of various types of works; Tendering Process and Contract Management, Quality Control, Productivity, Operation Cost; Land acquisition; Labour safety and welfare.

Paper II

  • Flow of Fluids, Hydraulic Machines & Hydro Power
  • Hydrology & Water Resources Engineering
  • Environmental Engineering
  • Geo-technical Engineering & Foundation Engineering
  • Surveying & Geology
  • Transportation Engineering

Mechanical Engineering

PAPER – I

  1. Fluid Mechanics: Basic Concepts and Properties of Fluids, Manometry, Fluid Statics, Buoyancy, Equations of Motion, Bernoulli’s equation and applications, Viscous flow of incompressible fluids, Laminar and Turbulent flows, Flow through pipes and head losses in pipes.
  2. Thermodynamics and Heat transfer: Thermodynamic systems and processes; properties of pure substance; Zeroth, First and Second Laws of Thermodynamics; Entropy, Irreversibility and availability; analysis of thermodynamic cycles related to energy conversion: Rankine, Otto, Diesel and Dual Cycles; ideal and real gases; compressibility factor; Gas mixtures. Modes of heat transfer, Steady and unsteady heat conduction, Thermal resistance, Fins, Free and forced convection, Correlations for convective heat transfer, Radiative heat transfer – Radiation heat transfer coefficient; boiling and condensation, Heat exchanger performance analysis
  3. IC Engines, Refrigeration and Air conditioning: SI and CI Engines, Engine Systems and Components, Performance characteristics and testing of IC Engines; Fuels; Emissions and Emission Control. Vapour compression refrigeration, Refrigerants and Working cycles, Compressors, Condensers, Evaporators and Expansion devices, Other types of refrigeration systems like Vapour Absorption, Vapour jet, thermo electric and Vortex tube refrigeration. Psychometric properties and processes, Comfort chart, Comfort and industrial air conditioning, Load calculations and Heat pumps.
  4. Turbo Machinery: Reciprocating and Rotary pumps, Pelton wheel, Kaplan and Francis Turbines, velocity diagrams, Impulse and Reaction principles, Steam and Gas Turbines, Theory of Jet Propulsion – Pulse jet and Ram Jet Engines, Reciprocating and Rotary Compressors – Theory and Applications
  5. Power Plant Engineering: Rankine and Brayton cycles with regeneration and reheat, Fuels and their properties, Flue gas analysis, Boilers, steam turbines and other power plant components like condensers, air ejectors, electrostatic precipitators and cooling towers – their theory and design, types and applications;
  6. Renewable Sources of Energy: Solar Radiation, Solar Thermal Energy collection – Flat Plate and focusing collectors their materials and performance. Solar Thermal Energy Storage, Applications – heating, cooling and Power Generation; Solar Photovoltaic Conversion; Harnessing of Wind Energy, Bio-mass and Tidal Energy – Methods and Applications, Working principles of Fuel Cells.

Paper II

  • Engineering Mechanics
  • Engineering Materials
  • Mechanisms and Machines
  • Design of Machine Elements
  • Manufacturing ,Industrial and Maintenance Engineering
  • Mechatronics and Robotics

Electrical Engineering

Paper I

  • Engineering Mathematics
  • Electrical Materials
  • Electric Circuits and Fields
  • Electrical and Electronic Measurements
  • Computer Fundamentals
  • Basic Electronics Engineering

Paper II

  • Analog and Digital Electronics
  • Systems and Signal Processing
  • Control Systems
  • Electrical Machines
  • Power Systems
  • Power Electronics and Drives

Electronics & Telecommunication Engineering

Paper I

  • Basic Electronics Engineering
  • Basic Electrical Engineering
  • Materials Science
  • Electronic Measurements and Instrumentation
  • Network Theory
  • Analog and Digital Circuits

Paper II

  • Analog and Digital Communication Systems
  • Control Systems
  • Computer Organization and Architecture
  • Electro Magnetics
  • Advanced Electronics Topics
  • Advanced Communication Topics

Download UPSC ESE Syllabus 2021 PDF

Official Site

**To Join Postal Recruitment News**

Online Test SeriesClick Here
To Join Whatsapp
Click Here
To Subscribe Youtube Click Here
To Join Telegram Channel
Click Here
Online ClassesClick Here

What is the Prelims Exam Date for UPSC ESE 2021?

UPSC will conduct the Engineering Services Exam (ESE) 2021 of preliminary level on 18th July, 2021.

What is the Mains Exam Date for UPSC ESE 2021?

Applicants who have cleared the Preliminary examination can now appear for the UPSC ESE Mains Exam that is to be conducted on 10.10.2021. 

How to Download UPSC ESE 2021 Syllabus?

Candidates can download UPSC ESE 2021 Syllabus from our website.

LEAVE A REPLY

Please enter your comment!
Please enter your name here