PEDA Assistant Manager Syllabus 2021 PDF – Download Exam Pattern for Manager & Programmer Vacancy. Punjab Energy Development Agency, Chandigarh has issued the Recruitment Notification for the post of Manager, Assistant Manager (Technical), Assistant Manager (Accounts), Assistant Manager (Public Relation) and Programmer Vacancies. The selection process for these has been announced as written test and interview. Therefore, all the candidates who have applied can download the required syllabus for this examination from this page.
PEDA Recruitment 2021 OUT – Salary Up to Rs. 44,900/- PM | Apply Online!!!
Page Contents
PEDA Assistant Manager Syllabus 2021 PDF
Name of the Board |
Punjab Energy Development Agency, Chandigarh |
Post Name |
Manager, Assistant Manager (Technical), Assistant Manager (Accounts), Assistant Manager (Public Relation) and Programmer |
Vacancy |
24 |
Exam Date |
Announced Soon |
Selection Process |
Written Exam & Interview |
Status |
Syllabus Available |
PEDA Selection Process 2021:
- Selection will be based on Written Examination. After the conduct of written test, marks obtained by the candidates in written test will be uploaded on the website.
- Merit list prepared on the basis of marks obtained in written test will be uploaded on the website.
- In case two or more candidates are having same marks in written test, then a candidate who is older will rank higher in the merit. Second priority will be given to candidates having more experience in the relevant field
PEDA Exam Pattern 2021: Manager, Assistant Manager (Technical), Assistant Manager (Accounts), Assistant Manager (Public Relation) and Programmer
- Merit list for selection will be prepared on the basis of total marks obtained in Objective Type Test. One objective type test of 100 Marks will be conducted. No interview will be conducted.
- Written test consisting of multiple choice questions will be conducted as under
Total no. of questions : 100
Total marks 100 Time : 2 hours |
||
Sr. No. | Details | No. of MCQs |
Part-I | General Aptitude | 40 |
Part-II | Engineering Discipline | 60 |
- Negative marking will be applicable and deduction of 0.25 marks will be made for each wrong answer.
- The examination questions will be in English only.
Minimum qualifying marks:
Minimum qualifying marks in written test will be 40%. Selection will be done on the basis of merit derived from performance in written test.
PEDA Syllabus 2021 PDF: Manager, Assistant Manager (Technical), Assistant Manager (Accounts), Assistant Manager (Public Relation) and Programmer
PART-I (40 MARKS)
GENERAL ENGLISH Grammar: Fill in the blanks, Error Spotting/ Sentence Correction, Voices and Narrations, Para jumble; Vocabulary: One-word substitution, Idioms & Phrases, Spelling Errors, Antonym/Synonym; Reading Comprehension: Passage, Cloze Test.
APTITUDE
Number systems, Decimal fractions, Square roots and cube roots, Average, Age problems, Calculation of percentage, Profit and loss, Ratio and proportions, Time and work, Distance and time, Problem on trains, Mixtures, Calendar, Clocks, Probability, Odd man out & series, Bar graph, Pie chart.
REASONING
General Mental Ability: Alphabet Test, Analogy, Arithmetic Reasoning, Blood Relation, Classification, Puzzle test, Data sufficiency, Number test, Coding decoding, Distance direction test, Logical Venn diagram, Missing Number; Non-Verbal Reasoning: Paper cutting & folding, Embedded figures, Figure formation & Analysis, Series, Cube & Dice, Mirror Image, Water Image, Pattern Completion.
GENERAL KNOWLEDGE
History of India, Indian and world geography, Indian polity and governance, Economic and social development, General science, Environmental ecology and climate change, Current affairs, Basic knowledge about Punjab state, Renewable Energy status of world, India and Punjab.
PART-II (60 MARKS)
ENGINEERING DISCIPLINE
Electrical Engineering, Electrical & Electronics Engineering
Section 1: Electric circuits Network elements: ideal voltage and current sources, dependent sources, R, L, C, M elements; Network solution methods: KCL, KVL, Node and Mesh analysis; Network Theorems: Thevenin’s, Norton’s, Superposition and Maximum Power Transfer theorem; Transient response of dc and ac networks, sinusoidal steady-state analysis, resonance, two port networks, balanced three phase circuits, star-delta transformation, complex power and power factor in ac circuits, Magnetic circuits, Self and Mutual inductance of simple configurations
Section 2: Electrical and Electronic Measurements Bridges and Potentiometers, Measurement of voltage, current, power, energy and power factor; Instrument transformers, Digital voltmeters and multimeters, Phase, Time and Frequency measurement; Oscilloscopes, Error analysis.
Section 3: Signals and Systems Representation of continuous and discrete time signals, shifting and scaling properties, linear time invariant and causal systems, Fourier series representation of continuous and discrete time periodic signals, sampling theorem, Applications of Fourier Transform for continuous and discrete time signals, Laplace Transform and Z transform. R.M.S. value, average value calculation for any general periodic waveform
Section 4: Electrical Machines Single phase transformer: equivalent circuit, phasor diagram, open circuit and short circuit tests, regulation and efficiency; Three-phase transformers: connections, vector groups, parallel operation; Auto-transformer, Electromechanical energy conversion principles; DC machines: separately excited, series and shunt, motoring and generating mode of operation and their characteristics, speed control of dc motors; Three-phase induction machines: principle of operation, types, performance, torque-speed characteristics, no-load and blocked-rotor tests, equivalent circuit, starting and speed control; Operating principle of single-phase induction motors; Synchronous machines: cylindrical and salient pole machines, performance and characteristics, regulation and parallel operation of generators, starting of synchronous motors; Types of losses and efficiency calculations of electric machines.
Section 5: Power Systems Basic concepts of electrical power generation, ac and dc transmission concepts, Models and performance of transmission lines and cables, Economic Load Dispatch (with and without considering transmission losses), Series and shunt compensation, Electric field distribution and insulators, Distribution systems, Per-unit quantities, Bus admittance matrix, Gauss- Seidel and Newton-Raphson load flow methods, Voltage and Frequency control, Power factor correction, Symmetrical components, Symmetrical and unsymmetrical fault analysis, Principles of overcurrent, differential, directional and distance protection; Circuit breakers, System stability concepts, Equal area criterion.
Section 6: Control Systems Mathematical modeling and representation of systems, Feedback principle, transfer function, Block diagrams and Signal flow graphs, Transient and Steady-state analysis of linear time invariant systems, Stability analysis using Routh-Hurwitz and Nyquist criteria, Bode plots, Root loci, Lag, Lead and Lead-Lag compensators; P, PI and PID controllers; State space model, Solution of state equations of LTI systems.
Section 7: Power Electronics Static V-I characteristics and firing/gating circuits for Thyristor, MOSFET, IGBT; DC to DC conversion: Buck, Boost and Buck-Boost Converters; Single and three-phase configuration of uncontrolled rectifiers; Voltage and Current commutated Thyristor based converters; Bidirectional ac to dc voltage source converters; Magnitude and Phase of line current harmonics for uncontrolled and thyristor based converters; Power factor and Distortion Factor of ac to dc converters; Single-phase and three-phase voltage and current source inverters, sinusoidal pulse width modulation.
Section 8: Renewable Energy Sources Solar energy: Radiation measuring instruments, Basics of Flat plate collectors, Concentrating type, Principle of photovoltaic conversion of solar energy, Application of solar energy; Wind energy: Characteristics and measurement, Wind energy conversion principles, Types and classification of WECS; Biomass Energy: Classification of biomass. Physicochemical characteristics of biomass as fuel, Biomass conversion routes; Small Hydropower: Overview of micro, mini and small hydro system, Types of hydro turbine; Ocean Energy: Principle of ocean thermal energy conversion system, Principles of Wave and Tidal energy conversion; Geothermal energy: Origin of geothermal resources, Types of geothermal energy deposits; Hydrogen: Principle & operation, Applications; Fuel Cells: Types of fuel cell, Fuel cell system, Biogas, Biomethanation, Bio-CNG.
Instrumentation Engineering, Electronics and Instrumentation
Section 1: Sensors and Industrial Instrumentation
Resistive-, capacitive-, inductive-, piezoelectric-, Hall effect sensors and associated signal conditioning circuits; transducers for industrial instrumentation: displacement (linear and angular), velocity, acceleration, force, torque, vibration, shock, pressure (including low pressure), flow (variable head, variable area, electromagnetic, ultrasonic, turbine and open channel flow meters) temperature (thermocouple, bolometer, RTD (3/4 wire), thermistor, pyrometer and semiconductor); liquid level, pH, conductivity and viscosity measurement. 4-20 mA two-wire transmitter.
Section 2: Communication and Optical Instrumentation
Amplitude- and frequency modulation and demodulation; Shannon’s sampling theorem, pulse code modulation; frequency and time division multiplexing, amplitude-, phase-, frequency-, quadrature amplitude, pulse shift keying for digital modulation; optical sources and detectors: LED, laser, photo-diode, light dependent resistor, square law detectors and their characteristics; interferometer: applications in metrology; basics of fiber optic sensing. UV-VIS Spectro photometers, Mass spectrometer.
Section 3: Electrical Circuits and Machines
Voltage and current sources: independent, dependent, ideal and practical; v-i relationships of resistor, inductor, mutual inductance and capacitor; transient analysis of RLC circuits with dc excitation.
Kirchoff’s laws, mesh and nodal analysis, superposition, Thevenin, Norton, maximum power transfer and reciprocity theorems.
Peak-, average- and rms values of ac quantities; apparent-, active- and reactive powers; phasor analysis, impedance and admittance; series and parallel resonance, locus diagrams, realization of basic filters with R, L and C elements. transient analysis of RLC circuits with acexcitation. One-port and two-port networks, driving point impedance and admittance, open-, and short circuit parameters.
Transformer: Types, equivalent circuit, phasor diagram, open circuit and short circuit tests, regulation and efficiency; Three phase induction motors: principle of operation, types, performance, torque-speed characteristics, no-load and blocked rotor tests, equivalent circuit, starting and speed control; Types of losses and efficiency calculations of electric machines, Magnetic circuits, Self and Mutual inductance of simple configurations.
Section 4: Signals and Systems Periodic, aperiodic and impulse signals; Laplace, Fourier and z-transforms; transfer function, frequency response of first and second order linear time invariant systems, impulse response of systems; convolution, correlation. Discrete time system: impulse response, frequency response, pulse transfer function; DFT and FFT; basics of IIR and FIR filters.
Section 5: Control Systems Feedback principles, signal flow graphs, transient response, steady-state-errors, Bode plot, phase and gain margins, Routh and Nyquist criteria, root loci, design of lead, lag and lead-lag compensators, state-space representation of systems; time-delay systems; mechanical, hydraulic and pneumatic system components, synchro pair, servo and stepper motors, servo valves; on-off, P, PI, PID, cascade, feedforward, and ratio controllers, tuning of PID controllers and sizing of control valves.
Section 6: Analog Electronics Characteristics and applications of diode, Zener diode, BJT and MOSFET; small signal analysis of transistor circuits, feedback amplifiers. Characteristics of ideal and practical operational amplifiers; applications of opamps: adder, subtractor, integrator, differentiator, difference amplifier, instrumentation amplifier, precision rectifier, active filters, oscillators, signal generators, voltage controlled oscillators and phase locked loop, sources and effects of noise and interference in electronic circuits.
Section 7: Digital Electronics Combinational logic circuits, minimization of Boolean functions. IC families: TTL and CMOS. Arithmetic circuits, comparators, Schmitt trigger, multi-vibrators, sequential circuits, flipflops, shift registers, timers and counters; sample-and-hold circuit, multiplexer, analog-to-digital (successive approximation, integrating, flash and sigma-delta) and digital-to-analog converters (weighted R, R-2R ladder and current steering logic). Characteristics of ADC and DAC (resolution, quantization, significant bits, conversion/settling time); basics of number systems, Embedded Systems: Microprocessor and microcontroller applications, memory and input- output interfacing; basics of data acquisition systems, basics of distributed control systems (DCS) and programmable logic controllers (PLC).
Section 8: Measurements SI units, standards (R,L,C, voltage, current and frequency), systematic and random errors in measurement, expression of uncertainty – accuracy and precision, propagation of errors, linear and weighted regression. Bridges: Wheatstone, Kelvin, Megohm, Maxwell, Anderson, Schering and Wien for measurement of R, L, C and frequency, Q-meter. Measurement of voltage, current and power in single and three phase circuits; ac and dc current probes; true rms meters, voltage and current scaling, instrument transformers, timer/counter, time, phase and frequency measurements, digital voltmeter, digital multimeter; oscilloscope, shielding andgrounding.
Section 9: Renewable Energy Sources Solar energy: Radiation measuring instruments, Basics of Flat plate collectors, Concentrating type, Principle of photovoltaic conversion of solar energy, Application of solar energy; Wind energy: Characteristics and measurement, Wind energy conversion principles, Types and classification of WECS; Biomass Energy: Classification of biomass. Physicochemical characteristics of biomass as fuel, Biomass conversion routes; Small Hydropower: Overview of micro, mini and small hydro system, Types of hydro turbine; Ocean Energy: Principle of ocean thermal energy conversion system, Principles of Wave and Tidal energy conversion; Geothermal energy: Origin of geothermal resources, Types of geothermal energy deposits; Hydrogen: Principle & operation, Applications; Fuel Cells: Types of fuel cell, Fuel cell system, Biogas, Biomethanation, Bio-CNG.
Civil Engineering
Section 1: Structural Engineering
Engineering Mechanics: System of forces, free-body diagrams, equilibrium equations; Internal forces in structures; Frictions and its applications; Centre of mass; Free Vibrations of undamped SDOF system.
Solid Mechanics: Bending moment and shear force in statically determinate beams; Simple stress and strain relationships; Simple bending theory, flexural and shear stresses, shear centre; Uniform torsion, Transformation of stress; buckling of column, combined and direct bending stresses.
Structural Analysis: Statically determinate and indeterminate structures by force/ energy methods; Method of superposition; Analysis of trusses, arches, beams, cables and frames; Displacement methods: Slope deflection and moment distribution methods; Influence lines; Stiffness and flexibility methods of structural analysis.
Construction Materials and Management: Construction Materials: Structural Steel – Composition, material properties and behaviour; Concrete – Constituents, mix design, short- term and long-term properties. Construction Management: Types of construction projects; Project planning and network analysis – PERT and CPM; Cost estimation.
Concrete Structures: Working stress and Limit state design concepts; Design of beams, slabs, columns; Bond and development length; Prestressed concrete beams.
Steel Structures: Working stress and Limit state design concepts; Design of tension and compression members, beams and beam- columns, column bases; Connections – simple and eccentric, beam-column connections, plate girders and trusses; Concept of plastic analysis – beams and frames.
Section 2: Geotechnical Engineering
Soil Mechanics: Three-phase system and phase relationships, index properties; Unified and Indian standard soil classification system; Permeability – one dimensional flow, Seepage through soils – two – dimensional flow, flow nets, uplift pressure, piping, capillarity, seepage force; Principle of effective stress and quicksand condition; Compaction of soils; One- dimensional consolidation, time rate of consolidation; Shear Strength, Mohr’s circle, effective and total shear strength parameters, Stress-Strain characteristics of clays and sand; Stress paths.
Foundation Engineering: Sub-surface investigations – Drilling bore holes, sampling, plate load test, standard penetration and cone penetration tests; Earth pressure theories – Rankine and Coulomb; Stability of slopes – Finite and infinite slopes, Bishop’s method; Stress distribution in soils – Boussinesq’s theory; Pressure bulbs, Shallow foundations – Terzaghi’s and Meyerhoff’s bearing capacity theories, effect of water table; Combined footing and raft foundation; Contact pressure; Settlement analysis in sands and clays; Deep foundations – dynamic and static formulae, Axial load capacity of piles in sands and clays, pile load test, pile under lateral loading, pile group efficiency, negative skin friction.
Section 3: Water Resources Engineering
Fluid Mechanics: Properties of fluids, fluid statics; Continuity, momentum and energy equations and their applications; Potential flow, Laminar and turbulent flow; Flow in pipes, pipe networks; Concept of boundary layer and its growth; Concept of lift and drag.
Hydraulics: Forces on immersed bodies; Flow measurement in channels and pipes; Dimensional analysis and hydraulic similitude; Channel Hydraulics – Energy-depth relationships, specific energy, critical flow, hydraulic jump, uniform flow, gradually varied flow and water surface profiles.
Hydrology: Hydrologic cycle, precipitation, evaporation, evapo-transpiration, watershed, infiltration, unit hydrographs, hydrograph analysis, reservoir capacity, flood estimation and routing, surface run-off models, ground water hydrology – steady state well hydraulics and aquifers; Application of Darcy’s Law.
Irrigation: Types of irrigation systems and methods; Crop water requirements – Duty, delta, evapo-transpiration; Gravity Dams and Spillways; Lined and unlined canals, Design of weirs on permeable foundation; cross drainage structures.
Section 4: Environmental Engineering
Water and Waste Water Quality and Treatment: Basics of water quality standards – Physical, chemical and biological parameters; Water quality index; Unit processes and operations; Water requirement; Water distribution system; Drinking water treatment. Sewerage system design, quantity of domestic wastewater, primary and secondary treatment. Effluent discharge standards; Sludge disposal; Reuse of treated sewage for different applications.
Air Pollution: Types of pollutants, their sources and impacts, air pollution control, air quality standards, Air quality Index and limits.
Municipal Solid Wastes: Characteristics, generation, collection and transportation of solid wastes, engineered systems for solid waste management (reuse/ recycle, energy recovery, treatment and disposal).
Section 5: Transportation Engineering
Transportation Infrastructure: Geometric design of highways – cross-sectional elements, sight distances, horizontal and vertical alignments. Geometric design of railway Track – Speed and Cant. Concept of airport runway length, calculations and corrections; taxiway and exit taxiway design. Highway Pavements:
Highway materials – desirable properties and tests; Desirable properties of bituminous paving mixes; Design factors for flexible and rigid pavements; Design of flexible and rigid pavement using IRC codes
Traffic Engineering: Traffic studies on flow and speed, peak hour factor, accident study, statistical analysis of traffic data; Microscopic and macroscopic parameters of traffic flow, fundamental relationships; Traffic signs; Signal design by Webster’s method; Types of intersections; Highway capacity.
Section 6: Geomatics Engineering
Principles of surveying; Errors and their adjustment; Maps – scale, coordinate system; Distance and angle measurement – Levelling and trigonometric levelling; Traversing and triangulation survey; Total station; Horizontal and vertical curves.
Photogrammetric and Remote Sensing – Scale, flying height; Basics of remote sensing and GIS
Section 7: Renewable Energy Sources
Solar energy: Radiation measuring instruments, Basics of Flat plate collectors, Concentrating type, Principle of photovoltaic conversion of solar energy, Application of solar energy;
Wind energy: Characteristics and measurement, Wind energy conversion principles, Types and classification of WECS;
Biomass Energy: Classification of biomass. Physicochemical characteristics of biomass as fuel, Biomass conversion routes;
Small Hydropower: Overview of micro, mini and small hydro system, Types of hydro turbine;
Ocean Energy: Principle of ocean thermal energy conversion system, Principles of Wave and Tidal energy conversion;
Geothermal energy: Origin of geothermal resources, Types of geothermal energy deposits;
Hydrogen: Principle & operation, Applications; Fuel Cells: Types of fuel cell, Fuel cell system, Biogas, Biomethanation, Bio-CNG.
Mechanical Engineering
Section 1: Materials, Manufacturing and Industrial Engineering
Engineering Materials: Structure and properties of engineering materials, phase diagrams, heat treatment, stress-strain diagrams for engineering materials.
Casting, Forming and Joining Processes: Different types of castings, design of patterns, moulds and cores; solidification and cooling; riser and gating design. Plastic deformation and yield criteria; fundamentals of hot and cold working processes; load estimation for bulk (forging, rolling, extrusion, drawing) and sheet (shearing, deep drawing, bending) metal forming processes; principles of powder metallurgy. Principles of welding, brazing, soldering and adhesive bonding.
Machining and Machine Tool Operations: Mechanics of machining; basic machine tools; single and multi-point cutting tools, tool geometry and materials, tool life and wear; economics of machining; principles of non-traditional machining processes; principles of work holding, jigs and fixtures; abrasive machining processes; NC/CNC machines and CNC programming.
Metrology and Inspection: Limits, fits and tolerances; linear and angular measurements; comparators; interferometry; form and finish measurement; alignment and testing methods; tolerance analysis in manufacturing and assembly; concepts of coordinate-measuring machine (CMM).
Computer Integrated Manufacturing: Basic concepts of CAD/CAM and their integration tools; additive manufacturing. Production Planning and Control: Forecasting models, aggregate production planning, scheduling, materials requirement planning; lean manufacturing.
Production Planning and Control: Forecasting models, aggregate production planning, scheduling, materials requirement planning; lean manufacturing.
Inventory Control: Deterministic models; safety stock inventory control systems.
Operations Research: Linear programming, simplex method, transportation, assignment, network flow models, simple queuing models, PERT and CPM.
Section 2: Fluid Mechanics and Thermal Sciences
Fluid Mechanics: Fluid properties; fluid statics, forces on submerged bodies, stability of floating bodies; control-volume analysis of mass, momentum and energy; fluid acceleration; differential equations of continuity and momentum; Bernoulli’s equation; dimensional analysis; viscous flow of incompressible fluids, boundary layer, elementary turbulent flow, flow through pipes, head losses in pipes, bends and fittings; basics of compressible fluid flow.
Heat-Transfer: Modes of heat transfer; one dimensional heat conduction, resistance concept and electrical analogy, heat transfer through fins; unsteady heat conduction, lumped parameter system, Heisler’s charts; thermal boundary layer, dimensionless parameters in free and forced convective heat transfer, heat transfer correlations for flow over flat plates and through pipes, effect of turbulence; heat exchanger performance, LMTD and NTU methods; radiative heat transfer, Stefan- Boltzmann law, Wien’s displacement law, black and grey surfaces, view factors, radiation network analysis
Thermodynamics: Thermodynamic systems and processes; properties of pure substances, behavior of ideal and real gases; zeroth and first laws of thermodynamics, calculation of work and heat in various processes; second law of thermodynamics; thermodynamic property charts and tables, availability and irreversibility; thermodynamic relations.
Applications: Power Engineering: Air and gas compressors; vapour and gas power cycles, concepts of regeneration and reheat. I.C. Engines: Air-standard Otto, Diesel and dual cycles. Refrigeration and air-conditioning: Vapour and gas refrigeration and heat pump cycles; properties of moist air, psychrometric chart, basic psychrometric processes. Turbomachinery: Impulse and reaction principles, velocity diagrams, Pelton-wheel, Francis and Kaplan turbines; steam and gas turbines.
Section 3: Applied Mechanics and Design
Engineering Mechanics: Free-body diagrams and equilibrium; friction and its applications including rolling friction, belt-pulley, brakes, clutches, screw jack, wedge, vehicles, etc.; trusses and frames; virtual work; kinematics and dynamics of rigid bodies in plane motion; impulse and momentum (linear and angular) and energy formulations; Lagrange’s equation.
Mechanics of Materials: Stress and strain, elastic constants, Poisson’s ratio; Mohr’s circle for plane stress and plane strain; thin cylinders; shear force and bending moment diagrams; bending and shear stresses; concept of shear centre; deflection of beams; torsion of circular shafts; Euler’s theory of columns; energy methods; thermal stresses; strain gauges and rosettes; testing of materials with universal testing machine; testing of hardness and impact strength.
Theory of Machines: Displacement, velocity and acceleration analysis of plane mechanisms; dynamic analysis of linkages; cams; gears and gear trains; flywheels and governors; balancing of reciprocating and rotating masses; gyroscope.
Vibrations: Free and forced vibration of single degree of freedom systems, effect of damping; vibration isolation; resonance; critical speeds of shafts.
Machine Design: Design for static and dynamic loading; failure theories; fatigue strength and the S-N diagram; principles of the design of machine elements such as bolted, riveted and welded joints; shafts, gears, rolling and sliding contact bearings, brakes and clutches, springs.
Section 4: Renewable Energy Sources
Solar energy: Radiation measuring instruments, Basics of Flat plate collectors, Concentrating type, Principle of photovoltaic conversion of solar energy, Application of solar energy;
Wind energy: Characteristics and measurement, Wind energy conversion principles, Types and classification of WECS;
Biomass Energy: Classification of biomass. Physicochemical characteristics of biomass as fuel, Biomass conversion routes;
Small Hydropower: Overview of micro, mini and small hydro system, Types of hydro turbine;
Ocean Energy: Principle of ocean thermal energy conversion system, Principles of Wave and Tidal energy conversion;
Geothermal energy: Origin of geothermal resources, Types of geothermal energy deposits;
Hydrogen: Principle & operation, Applications; Fuel Cells: Types of fuel cell, Fuel cell system, Biogas, Biomethanation, Bio-CNG.
Electronics & Communication Engineering
Section 1: Networks, Signals and Systems
Circuit analysis: Node and mesh analysis, superposition, Thevenin’s theorem, Norton’s theorem, reciprocity. Sinusoidal steady state analysis: phasors, complex power, maximum power transfer. Time and frequency domain analysis of linear circuits: RL, RC and RLC circuits, solution of network equations using Laplace transform. Linear 2-port network parameters, wye-delta transformation. Continuous-time signals: Fourier series and Fourier transform, sampling theorem and applications. Discrete-time signals: DTFT, DFT, z-transform, discrete-time processing of continuous- time signals. LTI systems: definition and properties, causality, stability, impulse response, convolution, poles and zeroes, frequency response, group delay, phase delay.
Download PEDA Assistant Manager Syllabus 2021 PDF
For Online Test Series | Click Here |
To Subscribe Youtube | Click Here |
To Join Whatsapp | Click Here |
To Join Telegram Channel | Click Here |
To Join Facebook | Click Here |
Selection will be based on Written Exam and Interview.
PEDA Manager and Assistant Manager (in various department) Exam Date will be announced soon.
Candidates can download PEDA Assistant Manager Syllabus 2021 from our website.